— Home —  Products —  MULTI-VALVE SYSTEM — JKC CONTROLLER

JKC CONTROLLER


JKC flow controller, the use of advanced microcomputer chip technology, specifically for the flow of water treatment equipment, regeneration control system

(1-3 multi-channel) instantaneous flow meter and the cumulative flow test function

The device displays the total flow rate query and clear function.

Each system (working, regeneration, standby, feedback) status display

Local forced to start regeneration manually

Remote forced signal control to start regeneration

Power failure protection function: other parameters set to maintain time after power failure is greater than 3 years





Technical Parameters


Project
Parameter
Instrumentation power supply
110V/AC 220V/AC 50/60HZ 5W
Waterproof level
IP65
Working environment
4-60°C
Dimensions
290×190×140
Pulse input
Pulse square wave 0-150HZ, probe (direct current) voltage 5-24V
Range of water 1-9999m3
Reproduction signal output
Passive relay contacts Contact capacity, AC220V/2A
Solenoid valve signal output
Passive contact Contact capacity AC220V/2A
Solenoid valve signal output
Passive contact


JKC Applications



JKC flow meter through the measurement of water consumption of various systems, when a system reaches the set value of water through the output switch signal to control the system JKA start regeneration.

JKC can be used to achieve a multi-use or simultaneous regeneration of the regeneration of the softening system


JKC Typical applications


Control method
System mode
Number of tanks
Control method
One with a prepared softening
D2
2
Flow control
Two tanks at the same time
E2
2
Dual-use a prepared softening
D3
3
Three tanks at the same time
E3
3


Downloads

No.
Description
Downloads


1 JKC manual
/ JKC manual.pdf